AP Track Patch and Replacement Signal Lens Textures for Just Trains (V15.02)
31st January 2019This is a patch for Just Trains Common Library track to use the Armstrong Powerhouse Track Enhancement Pack. Note: This will not patch the newer JT/GU track unless you install the additional optional patch.
(Also includes Optional Replacement Signal Lens Textures).
This now also includes a patch for the SECML route to use the patched CL track.
(Note: LU Track – with 4th rail – is only retextured due to the 4th rail being built into the track)
Requirements:
Any recent JT Route (that uses Common Library – I.E. Newcastle to Edinburgh, Western Mainlines, Chiltern Main Line, Kyle of Lochalsh, etc.)
Armstrong Powerhouse Track Enhancement Pack
Optional Requirements:
Armstrong Powerhouse Sky & Weather Enhancement Pack
Note: Please make sure that the track selection is set to 2D and NOT 3D (If applicable).
Update 1: updated terrain textures to use ballast textures from Track EP (Only for KofL, CML, NtoE & WM routes – WM already uses the CL terrain textures).
Update 2: Fixed missing textures.
Update 3: Added Optional Replacement CL (Common Library) Signal Lens Textures (With Backups of Original Textures).
Update 4: Retextured LUL 4th Rail track to match AP track.
Update 4.1: Fixed LUL crossovers.
Update 5: Added patch for SECML.
Update 6: Fixed Missing Winter textures.
Update 7: Patched track used by CORML (Cornish Mainline).
Update 8: Retextured Gravel.
Update 9: Added replacement Post Characters, changed to DTG ones.
Update 10: Fixed wrong Ballast texture on SECML.
Update 11: Patched the 3D track.
Update 11.1: Fixed sleeper issues with 3D track.
Update 12: Compatibility patch for Sheffield – Derby, removed the need for the texture patch from WCML South.
Update 12.1: Patched additional signal lens textures from SD signals.
Update 13: Fixed unpatched track on N2E, fixed unpatched track issues with SECML, patched gravel textures.
Update: 13.1 Compatibility patch for Derwent Valley extension for MML (fixed mssing terrain textures).
Update 14: Compatibility patch for Metropolitan Line (Finally).
2021 Update (V15): Removed unneeded backup files and added patch for the Newer JT/GU Studios Track (Tested on MML not SWEx).
V15.01: Update to Signal Lens Texture Patch – Fixed Distant Glows and Added additional replacement textures for signals included with UKTS Transpennine Asset Pack.
V15.02 – Updated LED Lens Textures to Replaced Default versions
Installed and ran JT SECML – track looks great but unfortunately the insides of my tunnels have disappeared. Any ideas as to why? What has been changed/updated and omitted? Anyone else experience of this?
Happy Days.
Many thanks for this works great very impressed with this thank you for this
can you tell me how to delete this patch please i thought i had it set on 2d turns out it was 3d
The 3d track has also been patched. To uninstall it just reinstall any of your JT products and it will override it, though I dont see why you would want to.
spotlight uh moonlight uh
Update 10: Fixed wrong Ballast texture on SECML.
Is this compatible for the Cornish Main line ?
Yes
How do I obtain the “AP Track patch” from WCML South V5.1 (for JT Wood track to function)?, in the .zip file is simply an .exe file and .pdf files, but no patch file.
Please can you inform me ‘where’ the patch file can be obtained?.
I am not planning on using the WCML Route, but I want to install this software, but the patch is required from the WCML software.
Thanks
I believe it was merged with the actual WCML south install
Update 8: Retextured Gravel.
Update 7: Patched track used by CORML (Cornish Mainline).
Update 6: Fixed Missing Winter textures.
As already mentioned, using the AP weather pack in heavy snow on JT’s South Western Expressways there are missing textures beside/below the track. Discovered during my live stream. Prior to this patch the textures were fine.
Apart from that, a good patch.
Found a problem with Just Trains Southwest Express route.
If you use Heavy snow for the scenario, when running the scenario it shows missing textures, the yellow and black, by the line.
I know a couple of people have found this problem. Otherwise a great pack, thank you.
Right cheers mate, I’ll look into it
Is the track fix also included in WCMLS 5.1 does anyone know?
if you this: ‘AP Track patch from WCML South V5 (for JT Wood track to function)’ then yes mate.
Many thanks – great advice!
Thanks for putting this together. I’ve noticed that there are a number of places along the Tay Coast Line on the ECMLS where the patch hasn’t been applied.
Also, has anyone found the amount to raise the track by to stop the ballast showing through, please?
I use 6cm (0.06 in RWTools) which does the trick, at least for for WCMLv5. It’s easy to do and doesn’t take long.
Brilliant. Thanks Alex. Do you lower the trackside objects at all?
No, I leave the trackside objects at default height. This helps to prevent the appearance of “floating” AWS ramps etc.