1M73 1710 Cardiff Central – Crewe Part 1
18th January 2020In the summer of 1981, the Crewe – Cardiff passenger services transitioned from Class 25 to southern based Class 33’s and earlier in the year 33024 & 33112 had been loaned to Cardiff and 33031 to Crewe for crew training. They spent another five years working over the Welsh Marches line on diagrams to Holyhead and Manchester Piccadilly even though their allocated home sheds were Eastleigh or Stewarts Lane on the southern region.
Drive the 1M73 1710 Cardiff Central to Crewe service to Hereford in the part 1 scenario
Further information-
Routes:
– South Wales Coastal: Bristol – Swansea Route Add-On http://store.steampowered.com/app/448181/
– Train Simulator: Welsh Marches: Newport – Shrewsbury Route Add-On https://store.steampowered.com/app/1105541/Train_Simulator_Welsh_Marches_Newport__Shrewsbury_Route_AddOn/
– South Wales & Welsh Marches Line – Shrewsbury to Bristol & Swansea. Merged route available from Steam workshop – https://steamcommunity.com/sharedfiles/filedetails/?id=1929208113
75 min duration, medium rating
Further packs needed –
– West Coast Main Line Over Shap http://store.steampowered.com/app/222613/
– Train Simulator: Doncaster Works Add-On https://store.steampowered.com/app/24095/
– BR Blue Pack Loco Add-On http://store.steampowered.com/app/325977/
– EWS & Freightliner Class 08’s http://store.steampowered.com/app/222578/
– BR Blue Class 08 add-on-livery http://store.steampowered.com/app/275804/
– Train Simulator: BR Class 31 Freight Loco Add-On http://store.steampowered.com/app/208378/
– Train Simulator: BR Class 33 Loco Add-On http://store.steampowered.com/app/208298/
– BR Class 37 Pack 01 (This DLC has been discontinued – the class 37 can be swapped out with the one available in the BR Blue Pack using RW Tools)
– BR Class 45 Peak Loco add-on http://store.steampowered.com/app/277731/
– BR Class 50 Loco add-on http://store.steampowered.com/app/208375/
– BR Sectors Class 56 Loco add-on http://store.steampowered.com/app/222636/
– Freightliner Class 70 Loco Add-On http://store.steampowered.com/app/65252/
– BR Class 101 DMU http://store.steampowered.com/app/222579/
– European Loco & Asset Pack http://store.steampowered.com/app/208300/
– TS Marketplace: VCA 45t GLW2 axle vans Wagon Pack http://store.steampowered.com/app/326015/
– TS Marketplace: VGA/VKA Wagon Pack Add-On http://store.steampowered.com/app/513106/
– TS Marketplace: BDA 80t Bogie Bolster Wagon Pack http://store.steampowered.com/app/326044/
– TS Marketplace: HSA Scrap Wagons http://store.steampowered.com/app/326017/
– Rebodied dia. 1/146 HTV 21tCoal Hoppers Wagon Pack http://store.steampowered.com/app/326010/
Further requirements –
FROM POWERHOUSE ARMSTRONG
– Armstrong Powerhouse Class 43 (Valenta)/MK3 enhancement pack https://www.armstrongpowerhouse.com/index.php?route=product/product&path=36_89&product_id=169
– Armstrong Powerhouse Class 56 enhancement pack https://www.armstrongpowerhouse.com/index.php?route=product/product&product_id=180
– Armstrong Powerhouse Class 47 pro sound pack https://www.armstrongpowerhouse.com/index.php?route=product/product&path=27_72&product_id=112
FROM VULCAN PRODUCTIONS
– BR Blue Class 47 Pack (Pre-1985)
– BR Blue Class 45/46
They’re available from https://www.vulcanproductions.co.uk/diesel-downloads.html
Note – when the scenario starts and your given the option to press EDIT or EXIT, you can press F2 to continue playing the scenario despite missing DLC’s
Enjoy!
An excellent scenario, love the AI around Cardiff and Newport. Had to change the 33 with RWtools, but other than not knowing where to put the file at first, all ran smoothly. Many thanks for taking the time to do this, time for part 2.
Richard
Where can I find this “RSC\Class33Pack01\RailVehicles\Diesel – Copy\Class33\BR_Blue_2\Engine\Class33.bin”, it is not mentioned above ?
Nice one Leigh, a pretty good Scenario some good AI to enjoy and a smooth run down to Hereford. Just to point out that the BR Blue Consist is registered in the wrong place, for some reason the BR Blue is registered to a folder that has copy in the middle of it. Easy to change with RW Tools in the Scenario editor. On the whole a good scenario using the old slam door trains. I give it 3 out of 5 and that is 1 point lower due to the packing of the scenario, Otherwise a 4 a five would have been given if the Scenario was harder, as it was way to easy to make the scheduled stops normally within a min to 2min under. Good job though, look forward to playing part 2 sometime this week. Regards Vince.
Thanks Vince,
I hadn’t noticed that in the RSC/Class 33 file directory I’ve a 2nd copy of the class 33 pack! Not sure why but just goes to show a little more attention by me is required when picking DLC!!
The timings were based on an old 1981 timetable so guess there was some leniency back then, though you’re right the stops were easy to achieve in the scenario, perhaps the class 33 in real life was a tad slower or the track speeds back then were different?
If your interested I did a class 33 scenario sometime ago on the SWC route from Bristol to Cardiff, it can be found here – https://steamcommunity.com/sharedfiles/ … =931904927
Anyway thanks for feedback,
cheers Leigh
https://steamcommunity.com/sharedfiles/filedetails/?id=931904927 – correct path for the other class 33 scenario!
Which route does this scenario need to be placed in? There is 3 routes indicated at the top, it does not say where this needs to be placed. Anyone please help.
Hi Vince
The route file is C:\Program Files (x86)\Steam\steamapps\common\RailWorks\Content\Routes\00000068-c000-0000-0000-000000002016
Sorry for the confusion this is the first time I’ve uploaded a scenario for a merged route and it shows!!
Regards Leigh
Hi @[email protected], thats ok, you will get used to it, and thanks for getting back to me. Im working on a scenario for another of Dannys Routes London Victoria + St Pancras to Dover (Via Faversham) 2016. Dannys merges are great. Looking forward to playing this and the second part. Will do a review once i have completed both parts. Regards Vince.
The packing of the scenario and Part 1 could be better and perhaps remove the .bak files before release as they are not required.
Thanks for the feedback Mold Junction, I’m learning all the time with this scenario creating & the uploading part