0Z21 08:04 Nottingham Eastcroft-Barnetby Sidings
2nd November 20210Z21 08:04 Nottingham Eastcroft-Barnetby Sidings
Briefing
Morning driver, today you are in charge of 0Z21 08:04 Nottingham Eastcroft-Barnetby Sidings. This is one of many test runs taking place for 56090 as it has just returned to service. Today 50050 & 50017 are partaking in these tests. You will be driving as far as Lincoln Central; where another driver will take over.
PLEASE NOTE
This scenario will appear under Class 56 in the standard scenario tab in the drive menu. This is because the start of the scenario begins with you taking the 56 out of the depot, before collecting the 50s and then heading into Nottingham. Also with both the 50 and 56 working, you will find that 100% throttle will get you up to speed very quickly and as such I would recommend only a small amount of power when moving off.
How to Install
1. Extract using 7zip
2. Copy Contents into Railworks
3. Done!
Route: JT MML- Nottingham-Lincoln Extension.
Requirements
Armstrong Powerhouse
Class 37 vol.2*
Class 43VP185 EP
Class 50
Class 56 EP
Class 66 EP
Class 91 EP
Class 150/2
Class 156
Class 158C EP
Class 170
FSA wagons
Weather EP
ATS
Clowes 222 destination upgrade*
InterCity 225 LNER/VTEC Pack
BH Reskins
JT Class 60 reskin pack
DTG
Class 56 (For AP 56 EP)
Class 66 FL
Class 91
Class 159 (For AP 158/C EP)
Class 170 (For AP 170 EP)
TEA wagons (Believe they come with class 70)
Just Trains
Class 60
Class 153
Meridian
MJW
Class 153 revamp pack
Vulcan Productions
Class 168/170 Air dam & Tripcock pack
Arriva Cross Country Class 170 with various decals
I do believe that is everything, if anything has been missed or you have any issues, please let me know and I will do my best to sort out the issue. Other than that I hope you enjoy this scenario!
This scenario involves a lot of slow running, adverse signals, stops etc. So if you prefer fast running, this scenario might not be for you!
How do you get into the shunt siding that it instructs you to at the start of the scenario?
I change the points and get stuck on red at the shunt signal before the sidings.
Signaller doesn’t allow you to pass and the points don’t change to route you into the shunt siding. There’s also no manual switch go get into those sidings so do I just skip that part and reverse back to the other locos?
Sorry to hear you are having an issue with this scenario. Please make sure you have the latest version of MML and the extensions. If you are still getting the issue, please let me know and I will look into this.
It’s been a while since I uploaded this scenario, but I fear that an update to the route may have affected the pathing.
Thank you for the reply.
I have checked I am running the latest version of all the MML routes (the versions that merge together) and unfortunately this issue is still present.
When you change the points and head towards the shut neck, you are met with the red shunt signal (NN4012). This signal does not change, the signaller won’t allow you to TAB past and the points do not change.
The route still shows as pathed into platform 6.
Hi where do I download class 170 xc reskin from thx
I believe it is this pack on Vulcan Productions- Arriva Cross Country Class 170 with various decals under Legacy.
Very nice, Thank you.
Thank you BENELENA, glad you enjoyed it!