![[LD] 1Z44 1618 Swanage – Leeds](https://alanthomsonsim.com/wp-content/uploads/2023/09/1Z44-farewell-1140x641.jpg "[LD] 1Z44 1618 Swanage – Leeds")
[LD] 1Z44 1618 Swanage – Leeds
28th September 2023Hello, this is one ‘standard’ scenario for the DTG Portsmouth Direct line
Duration: 45 minutes.
Track Covered:
Bournemouth – Southampton Central
Installation:
To install, simply extract the .zip file using whichever software you have and copy the ‘Content’ folder to your RailWorks install “usually” found here:
C:\Program Files (x86)\Steam\steamapps\common\RailWorks
Weather Conditions: Fair/High Cloud
Season: Autumn 2023
______________________
>Scenario Guide:
Driver,it is the 26th of September 2023. You will be driving ex-XCs HST 43007 and 43008 between Bournemouth and Southampton Central in this journey on it’s return leg from Swanage to Leeds. There will be plenty of rail enthusiasts out and about on the network due to this being the last passenger working. You will be running smoothly on schedule, but will be following an passenger service as far as Southampton Central.
_____________________
Calling Patterns:
Running fast via Southampton Central
_____________________
Requirements:
(For Route)
DTG Bournemouth – Southampton
(Stock)
AP Class 43 MTU Enhancement Pack
CrossCountry HSTs Farewell Pack (IMPORTANT) ATS
Class 43 Revamp Pack
AP Class 450/444 Enhancement Pack
SWR 444-450 Reskin Pack ( *FREE* SEMAPHORE SIMULATIONS)
(DTG Portsmouth Direct Line: London Waterloo – Portsmouth)
AP Class 377 Enhancement Pack
(DTG Chatham Mainline)
JT Voyager Class 220/221
Class 220/221 (JT) – Updated Consists ATS
DTG Class 166 Kuju
Train Simulator: European Loco & Asset Pack
Superalbs Class 166 GWR reskin
AP Signal Enhancement Pack
AP Weather Pack
I hope you enjoy this scenario 🙂
awesome scenario bud. However, you have put Portsmouth Direct Line Route up instead of Bournemouth to Southampton. Just thought i’d let you know.
Fantastic Scenario, Thoroughly enjoyed this one.
Great work.
Regards Tom
Thanks! Installing the scenario now, and I think you’ve missed https://alanthomsonsim.com/downloads/jt-class-220-221-no-driver-no-passengers-pack/ as a requirement. Also, I’m not sure what you mean by ” DTG Class 166″.
Hi Orion, I have just updated the requirements I forgot that i used the ‘no driver’ consist & the Class 166 is used in this scenario. Therefore it depends where you get it from. Can come under European Pack in Steam.
An excellent scenario thank you. I
see you put this scenario in routes not Scenarios many thanks John Cannon
Hi John,
Thanks again for the feedback :).
Also, I have no clue why it didn’t go into scenarios. It has been changed now, thanks again.