[Train Simulator 2021][TASH][Class 319 NSE]Gatwick to Rugby 1994 WCML South20th March 2021
A scenario for the WCML South Route set in the Summer of 1994 where you will drive a Class 319/0 from Willesden Junction to Rugby with stops at Wembley Central, Harrow & Wealsden, Bushey, Watford Junction, Hemel Hempstead, Berkhampstead, Tring, Leighton Buzzard, Bletchley, Milton Keynes and Wolverton on the way. There is a lot of AI trains in this scenario although they should not be a bother to your service but you may have to wait for the road just outside Rugby if you are early.
Here is what you will need to make this scenario useable.
Class 90 & Mk3 DVT Pack
Class 319 Pack 2
Class 321 Pack
Class 313 Pack
Class 37 Pack 1
Class 43 HST Enhancement Pack Valenta
Class 56 Enhancement Pack
Class 150/1 Enhancement Pack
BDA/BZA Steel Carriers
FSA Wagon Pack
WCML North (for the Class 86 and stock)
WCML Over Shap (for the Class 87 and stock)
Class 150/1 FGW*
Class 60 Locomotive Pack
Class 56 Sectors*
Class 92 Locomotive Pack
European Loco & Assets Pack*
*These are used as the base packs for the AP Enhancement Packs
Scenario Type: Standard
Duration: About 90 Minutes.
You are welcome to swap trains about in the scenario editor if you wanted to use better trains that you may own already or don’t have the required DLC but I am not responsible for any errors if you do this.
Please post any bugs or issues although I have tested this scenario many times and it works fine on my system although it may not work on yours. Use this scenario at your own risk.
Feedback and suggestions are most welcome and please enjoy the scenario.
Please check out my channel “Transport & Simulation Hub” on YouTube for Transport and Gaming videos and please support my creations by liking and sharing :).
I didn’t think these services ran before 1997 after Connex started them up?
Best to treat this one as semi-fictional mate :).
Thanks. I just watched the video. Glad you enjoyed it mate.
A nice scenario, but had a similar issue to Geoff. On scenario start, message “unable to resolve clash service 5” & “many failures service, 2,8,12,15,19,20,22,23”.
Scenario runs, but all A.I on the up slow line after willesden remains static. All other A.I seems to run ok!
Hi there. I am very sorry to hear that this scenario is not working for you as it should have done. In light of writing up my requirements. I would recommend installing this pack
and the Overhauled HST’s from Major Wales although optional, I have these as standard for all my WCML scenarios.
As a side note. I have allowed 60-90 seconds for the player to set up the train before moving off from the start point. Such as setting up the radio and other optional extras. I am taking notes and the next version of this style of scenario set in 1999 will be improved and I will add timetabled hold points so that this will not happen again. But thank you for downloading this scenario.
Thanks for the reply. I already have the stock you mentioned installed. I will try again & wait a little while longer before setting off after setting up the cab to see if the A.I on the slow line moves. Cheers
No problem. The reason I allowed extra timing at the stations is because there is DOO (Driver Only Operations) and GO (Guard Operations) for the doors (Ctrl+R) which if the latter is used. I would wait a few seconds before moving off from each station then all should be okay. I am going to play it safe and I think its safe to say that the Overhauled HST’s from MJW and the other pack are compulsory requirements for all scenarios that I will release in this era of my 1990’s scenarios for all parts of the WCML Scenarios I am planning including the planned Class 60 scenario that is coming up :).
Great scenario. Really enjoyed it with some great AI. Only issue i found was the NSE 321’s were all static. Am i anything amiss?
Hi there. I allowed 60-90 seconds at the start of the scenario so that the player will have enough time to prep the train, set up the radio and to get everything up and going before moving off. I have set the timings to meet the AI accordingly and if they are not moving, it might be possible that you could arrive to their location a minute or two early. The timings are set at 75% accuracy so the AI might be being lazy on this occasion. Sorry about that.
Hi pal that has sorted it. I was being to eager to get away. Thanks again.
No problem mate. Glad to hear its all working for you buddy.
Bloody brilliant scenario, I did it on my stream tonight and everyone enjoyed it! More please!!!
Thank you for downloading. I am glad that it was enjoyable. I have a 1999 version planned that will be improved over this one :).
Could you do a Part 1 for this service (Gatwick Airport to Willesden Junction) using one of Danny’s merged routes?
I will see what I can do mate. Thanks for the suggestion. All duly noted :).
Glad you enjoyed it mate.