1P74 Darlington – Manchester International Airport.7th January 2022
Good afternoon! Take this 6 Car class 185 from Darlington as far as York where another driver will take the train further on to Manchester International Airport. You will be in the cab of 185112 with 185139 on the rear. However it has started to snow around the network so keep your wits about you. As soon as you get into the cab get set up and prepared for the run! There should be no issues that will affect your run.
Headcode – 1P74
Signal Number – 906
Destination – 9271
DPS ECMLNE – https://www.dpsimulation.org.uk/ecmlne.html
ATS Class 185 – https://alanthomsonsim.com/product/ats-imbue-studios-class-185-pack/
ATS Chat Moss (For the TPE 802 Reskin) **- https://alanthomsonsim.com/product/ats-chat-moss-manchester-stations-to-liverpool-lime-street-via-the-chat-moss/
LNER Azuma** – https://alanthomsonsim.com/downloads/class-800-lner-azuma/
Armstrong Powerhouse Sky Weather EP* – https://www.armstrongpowerhouse.com/enhancements/general/sky_weather_enhancement_pack
Just Trains Class 220/221 – https://www.justtrains.net/product/voyager-advanced-2019 OR https://alanthomsonsim.com/product/just-trains-voyager-advanced/
* Not Required but heavily recommended
** Other Dependencies will be required, check the download link!
Hi Stobby, scenario loaded OK, on entering the cab, doors will open but red bar for passengers loading does not appear. Get to departure time and doors will not close, consequently train will not move. Any ideas please?.
Hello, Thank you for bringing this to my attention this is something that is occurring on my end as well however throughout my testing I found it to not interfere with the timings and when I depart Darlington a X will show in the F1 menu but will still allow me to continue on with the scenario. the reason why this is done that way is because platform 3 for some reason isn’t showing as being long enough to fit a 6 car unit on the service which was used IRL on the service this is based off of. I’m not sure of a fix at this moment in time however i will start looking into it.