3Q19 19.10 Preston – Neville Hill TRSMD (2008)
11th April 2021Hi, and thank you for downloading this 95 minutes scenario for the WCML Over Shap route.
To install, simply copy the enclosed ‘Content’ folder to your Railworks folder. This is a ‘Standard’ scenario and is named “[MJC] 3Q19 1910 Preston – Neville Hill TRSMD”
Summary
On a fine early-Summer evening drive the first leg of this overnight test train top and tailed with Network Rail’s 31233 and 31285, that will cover a number of lines before ending up in Leeds Neville Hill. Set-up your cab and switch on the tail lights on the rear loco. You may depart once the ground signal ahead clears. This train has been stabled in Preston since last night’s testing, and is now ready for another night roaming the rails. Once you get the signal you will head towards Lancaster, then visit Morecambe, Heysham Port, and then head to Carnforth. The train will not be recording on the West Coast Main Line as this is covered by the New Measurement HST, this train concentrates on the secondary branch lines. Maximum speed is 80mph. Year: 2008.
Requirements
The following are required to ensure that the scenario functions correctly:
* From Armstrong Powerhouse https://www.armstrongpowerhouse.com/ :
– Class 31 enhancement pack (and associated requirements)
– Class 37 loco volume 2
– Class 150/2 DMU pack
– Class 156 DMU pack
– Mark 2A-2C coach pack
– Mark 2D-2F coach pack
* From STEAM:
– Class 390 EMU (original S9BL version) https://store.steampowered.com/app/208343/Train_Simulator_Class_390_EMU_AddOn/
– West Coast Main Line Over Shap route add-on https://store.steampowered.com/app/222613/Train_Simulator_West_Coast_Main_Line_Over_Shap_Route_AddOn/
* From Alan Thomson Sim:
– Fuller Simulations Class 185 Pack v2.2 (and associated requirements) https://alanthomsonsim.com/downloads/fuller-simulations-class-185-pack/
* From DP Simulation:
– Class 390 Virgin reskin by Horgy https://www.dpsimulation.org.uk/miscreskins.html
* From Just Trains:
– Class 20 Advanced (for FNA wagons) https://www.justtrains.net/product/class-20-advanced-collection
– Class 220 / 221 Voyager Advanced (2019) https://www.justtrains.net/product/voyager-advanced-2019
Optional Requirements
The following are NOT required to ensure that the scenario functions correctly, however they will add to the immersion:
* From STEAM:
– European Loco and Asset Pack, static only https://store.steampowered.com/app/208300/Train_Simulator_European_Loco__Asset_Pack/
* From Armstrong Powerhouse https://www.armstrongpowerhouse.com/ :
– Sky and Weather enhancement pack.
– Class 37 loco volume 1, static only
– Class 350 enhancement pack (and associated requirements), static only
– Mark 1 coach pack volume 1, static only
* From Just Trains:
– JJA Autoballaster wagons, static only https://www.justtrains.net/product/jja-autoballaster-pluspak
– Class 153 Advanced, static only https://www.justtrains.net/product/class-153-dmu-advanced
I do hope you enjoy this scenario.
Unfortunately it messes the scenario up at Lancaster. I wrote the message above just before arrival at the loop before Lancaster. ( up until that point the scenario worked well though…)
Hi Jamie,
It’s the original (S9BL) Class 390, with the Virgin Trains reskin by Horgy that is available on the DP Simulation website.
Hope this helps.
Cheers, Matt
Good evening Matt,
I’m just wanting to double check which 390 pack is required. I have the requirements mentioned above but I appear to be missing a 390 set which I’ve noted below;
Virgin Class 390 (full set)
Other then that the scenario seems to run fine, what a great drive as always.
Jamie
Unfortunately it messes the scenario up at Lancaster. I wrote the message above just before arrival at the loop before Lancaster. ( up until that point the scenario worked well though…)