![1Z85 Brighton Pride Additional 1Z85 Brighton Pride Additional](https://alanthomsonsim.com/wp-content/uploads/edd/2020/08/jpg/sprinter158/20200727174053_1-1-1140x641.jpg)
1Z85 Brighton Pride Additional
3rd August 2020It’s Brighton Pride day, and Thameslink are running an additional “Limited Stop” service from Bedford to help transport all the pride goers. Start by bringing the set off the depot, before working down to Brighton.
Track Covered: Bedford to Brighton
Traction: Thameslink Class 377
Duration: 150 Minutes
Difficulty: Medium/Hard
Conditions: Summer, Clear
Note: Although this is a fictitious scenareo, most AI is realistic.
Reqirements
Payware
Steam
⦁ London to Brighton
⦁ London to Gillingham
⦁ South London Network
⦁ London to Bedford
⦁ Class 378 Capitalstar
⦁ Class 170
⦁ Class 465
⦁ European Loco & Asset Pack
Armstrong Powerhouse
⦁ Class 168/170/171 Enhancement Pack
⦁ Class 375/377 Enhancement Pack
⦁ Class 43 MTU Enhancement Pack
⦁ Class 43 VP185 Enhancement Pack
Just Trains
⦁ Class 222 Meridian
Freeware
Steam Workshop
⦁ South London and Thameslink
ATS
⦁ Desiro City Pack – Class 700/707/717
Superalbs
⦁ Class 166 GWR
⦁ Class 166 FGW Plain Blue
⦁ Class 387 GTR Gatwick Express
Installation
Copy and paste the Content folder into your RailWorks root directory, usually located in
C:\Program Files (x86)\Steam\steamapps\common\Railworks.
Hi mate I was playing your scenario and found that 5he scenario is broken between blackfriars and Brighton and I’m not making this stuff up the mile counter is reading 0ft after black friars please could you fix this as it stops me from completing the scenario
Excellent scenario. Well done. This route is under-utilised for how good it is personally and I have made a scenario for it myself, so I know what challenges are faced. Love that you have started the train from the depot. Excellent work and really ambitious. Would be great to have a journey from Brighton to Bedford. Again well done, really enjoyed it
Hi, After working out how to get out the depot by changing points, Im now stuck in between blackfriars and London Bridge, due to trains stopped working. tried setting it up to persuade it to move but no luck, any help please, the offending train looks like it started to move but then has stopped, like other trains northbound.
I don’t understand because when I go up to the red signal and request to pass it doesn’t let me even though there aren’t any trains about plus almost every junction is against my train.
I HAD TESTED THIS TRAIN ALTHOUGH I HAVE ALL REQUIREMENTS PER SCENARIO IT SEEMS TRAIN WONT PHYSICALLY START IN DEPOT SO IT LOOKS LIKE THIS SCENARIO IS NOT TESTED.
This most certainly HAS been tested, numerous times.
You will need to do a “Cold Start” in the depot, as per the AP 375/377 manual.
Can’t get out the depot
You may need to set up your route out of the depot manually (as is common with scenarios in depots)
Seems to be an Issue just after leaving London Blackfriars. Sat at signal VS1077 for 5 minutes on a red and nothing happened.
Hi Nick, There is a wait between London Blackfriars and London Bridge, as you have to wait for another train to come off the spur. It will happen (well it should do!)
I have the same problem. All the trains stop from St. Pancras
This has not been tested. You can’t get out of the siding
You should have moved the arrows manualy
This most certainly HAS been tested, numerous times. You may need to set up your route out of the depot manually (as is common with scenarios in depots)
I’m not able to get the train out of the depot… it just leads me to a siding
You may need to set up your route out of the depot manually (as is common with scenarios in depots)
Is this train going through London Bridge?
Yes, it goes via London Bridge.