![Network Scot East Phase 2 Scenario Pack by Agdron [AGD]](https://alanthomsonsim.com/wp-content/uploads/2025/01/Polish_20240826_215600500-scaled.jpg "Network Scot East Phase 2 Scenario Pack by Agdron [AGD]")
Network Scot East Phase 2 Scenario Pack by Agdron [AGD]
28th January 2025Network Scot East Phase 2 Scenario Pack by Agdron
This scenario pack contains 22 Scenarios, 19 being original makes and 3 being alternative stock swaps of scenarios in previous packs I made. These are all for the Network Scot East Route (Phase 2) which covers the rail network of central Scotland. These scenarios are primarily passenger scenarios, with a couple ECS Scenarios and Fictional Scenarios in there. This pack covers pretty much everywhere to drive within the route, and features a variety of stock.
The majority of the scenarios follow a real timetable based around 2023 to 2024. Class 365 scenarios have had their stock swapped from the modern timetable to more accurately reflect the period they ran in, but DO NOT follow a 2018 timetable.
The 22 Scenarios Included in the pack are as follows:
Class 385
- 1R56 1215 Glasgow Queen Street to Edinburgh
- 2N50 0715 Alloa to Glasgow Queen Street
- BOXING DAY: 1R15 1115 Edinburgh to Glasgow Queen Street
Class 365 (NOTE: These do not run on accurate timetable)
- 1R66 1215 Glasgow Queen Street to Edinburgh
- 2N50 0715 Alloa to Glasgow Queen Street
- 2P48 1652 Dunblane to Edinburgh
Class 156
- 1Z69 1523 Dunfermline Queen Margaret to Stirling [Fictional]
- 2W73 1803 Glasgow Queen Street to Anniesland
- 2W74 0632 Anniesland to Glasgow Queen Street
Class 158
- 1L61 1111 Glasgow Queen Street to Dundee
- 2G22 0754 Cowdenbeath to Edinburgh
- 2G59 1016 Edinburgh to Glenrothes with Thornton
Class 170
- 1L90 1938 Perth to Edinburgh
- 2P84 1938 Edinburgh to Perth (via Dunblane)
Class 43 (HST)
- 1A81 0933 Glasgow Queen Street to Aberdeen
- 1B26 1050 Inverness to Edinburgh
- 1B88 1604 Aberdeen to Edinburgh
- 1T02 0516 Perth to Glasgow Queen Street
Class 800
- 1E03 0534 Stirling to London Kings Cross
- 1W11 0951 London Kings Cross to Aberdeen
- 3E03 0400 Craigentinny T.GR.S.M.D to Stirling
Class 47
- 1Z27 0932 Glasgow Queen Street to Inverness [Fictional]
With that extensive list, you may be wondering about the requirements. Each scenario has it’s own individual requirements, but I am too lazy to list those, so here is a bulk list. Be warned: In the nature of anything NSE related… it’s a lot, so please use Locoswap or TSTools to check if you have everything for an individual scenario
REQUIREMENTS:
- Armstrong Powerhouse Class 156 DMU Pack
- Armstrong Powerhouse Class 170 Enhancement Pack (+ its dependencies)
- Armstrong Powerhouse Class 158 (Cummings) Enhancement Pack (+ its dependencies)
- Armstrong Powerhouse Class 800 Enhancement Pack (+ Its dependencies)
- Armstrong Powerhouse Class 365 Enhancement Pack (+ Its dependencies)
- Armstrong Powerhouse Class 321 EMU Pack
- Armstrong Powerhouse Class 318 EMU Pack
- Armstrong Powerhouse MTU HST Pack
- Armstrong Powerhouse Class 66 Enhancement Pack (+ its dependencies)
- Armstrong Powerhouse Mk2D-F Coach Pack
- Alan Thomson Simulation Class 385 (+ its dependencies)
- Alan Thomson Simulation + Imbue RES Pack (+ its dependencies)
- Gold Star Trains Multi Purpose Vehicle Pack
- Just Trains Voyager Advanced 2019 + Semaphore Simulations Meridian/Voyager Overhaul
- DTG West Coast Mainline South (390 Soundpack Recommended)
- MNRR Bridge Platform Assets (for Longannet Branch Scenario Only)
- Armstrong Powerhouse Sky and Weather Enhancement Pack 2.0 (For all scenarios. Weather will not display correctly without these)
UNFORTUNATELY DUE TO CONFLICTS WITH THE SCOTRAIL STOCK PACK, THIS IS ALSO A REQUIREMENT EVEN THOUGH THE SCENARIOS WERE MADE WITHOUT IT. IF YOU WISH TO HAVE DESTINATIONS DISPLAY CORRECTLY, PLEASE RE-INSTALL THE 170 AND 158 EP’S AFTER INSTALLATION OF THE STOCK PACK!
Due to issues with scenarios loading the following reskin is also a requirement. This has not been used anywhere in the scenarios but due to some silliness with the scenario editor it is for some reason requiring it:
If you become aware of anything I have missed in this list, please let me know ASAP
You can install this pack by simply copying the Assets folder over and into your railworks directory.
All Scenario’s included in this pack are prefixed with [AGD-NSEP2]. These were all made over an extended period of time, so bonkyness may vary. Either way, please enjoy whichever ones you choose to play, and thank you for travelling with Agdron Development!
The total duration of all scenarios in this pack combined is 1135 which equates to approximately 18.9 hours of scenarios. Enjoy!
IMPORTANT: To Everyone who has installed this pack, there are two new (free) requirements which should mitigate the issues with the HST. For the Scotrail Stock Pack, your detonations will display incorrectly if you don’t re-install the 170 and 158 EP’s on top of them. I am not going back through all the scenarios to change just the destinations (there is scripting related to this so it won’t happen without breaking the announcements), so it is up to you whether you mind them being incorrect or not.
Similarly it has come to my attention that an odd HST is popping up at the beginning of Scenarios. I have checked through the scenarios and they all use the AP HST ONLY. I don’t know why the caledonian railworks HST is showing up as a missing consist. You have two options to fix this. Either you press F2 and cancel at the beginning of each scenario, OR you can install the Caledonian Railworks Kuju Reskin which should fix this:
https://caledonianrailworks.wordpress.com/reskins-by-class-type/class-43-hst/
i ve had same thing with scotrail hst not showing and i checked and its not ap scotrail hst as just reinstalled and still getting same error
Scotrail HST
MK3 Scotrail HST Guard A
MK3 Scotrail HST TSO
Scotrail HST_nd
I’ve realised what the issue is, because I had the Scotrail Stock Pack Installed at the time of adding the HST it’s likely something to do with that. Can you be more specific about which scenario this is?
Some scenario’s won’t work as it says I don’t have the Scotrail HST and Mk3s, eventhough I have the AP MTU HST pack installed.
turn out your using a Scotrail HST reskin rather than the one from the AP pack.
If that pops up, please just press F2 and then cancel. I have used the AP HST Pack within these scenarios, no extra reskins were installed for any of these scenarios. If it is claiming that there are, then it is incorrect. The HST being flagged up list likely due to the box still being ticked within the scenario for the old Caledonian Railworks Kuju Reskin. I have ensured that every single HST was swapped out to the new AP HST
Hi Agdron, thank you for your work, please tell me where can I find th HST Scotrail.
Thank you
Requirements are listed with Hyperlinks to each product. Just click on the HST Link and it will take you to the product page