![[LD] 5Z45/1Z46 16+19 St Pancras International to Ilkeston (2023)](https://alanthomsonsim.com/wp-content/uploads/2025/11/1Z46.jpg "[LD] 5Z45/1Z46 16+19 St Pancras International to Ilkeston (2023)")
[LD] 5Z45/1Z46 16+19 St Pancras International to Ilkeston (2023)
15th November 2025Hello! This is one scenario for the wonderful AP MML: London St Pancras to Bedford Enhancement Pack.
DESCRIPTION: It is Saturday, 28 October 2023, and you are at Cricklewood Depot, back on site to prepare the 125 Group HST set for its return working after a successful run into London at 12:00. The unit has been stabled on the Fuel Road since midday due to EMR platform occupancy at St Pancras, and you will now take it ECS back to St Pancras International for the scheduled 16:19 departure. Your task is to prepare power cars 43159 and 43089 from cold and ready the train for the shunt movement to Platform 3, where you will later board passengers and take them in style up the Midland Main Line to Ilkeston. Weather conditions are mild and overcast, and you should expect adverse signals en route, so exercise caution and adhere to all speed restrictions. Ensure the GSM-R is correctly configured; the maximum permitted speed is 125 mph.
The Scenario starts at Cricklewood Depot.
TRACTION: 43089/43159
DURATION: 80 minutes
DIFFICULTY: Hard
CONDITIONS: Overcast with chance of light rain
REQUIREMENTS:
Payware:
AP MML: London to Bedford Enhancement Pack (Route)
AP Class 43 MTU Enhancement 2.0
AP Class 43 VP185 Enhancement Pack 2.0
AP Signal Enhancement (Essential for adverse signalling)
AP Sky & Weather Enhancement
AP Class 700 Enhancement Pack
JT Class 222 Meridian Pack
ATS Class 360 Pack
DTG Class 360
DTG Class 395
ATS OHLE Pack
Freeware:
Bedford Series 2 OHLE Patch (ATS)
Class 700/707/717 EP Patch (Semaphore Sim)
Class 395 Refurbishment
V1.2 (For those who has had issues with it crashing, please re-download this file as it has been updated since 11:32 on 17/11/2025)
_____________________________________________________________________________________________________________________
For installation: Please click onto the zip folder and drag the ‘Content’ into your Rail Works Directory.
– I enjoy making scenarios as one of my hobbies, I hope you enjoy playing this scenario 🙂
Just completed V1. 2. Ran faultless for me. Thoroughly enjoyable. Thank you.
i reinstalled this https://alanthomsonsim.com/downloads/series-2-overhead-line-patch-for-bedford-station-addition-to-ap-mml/.loaded up no issues.thx
download v1.2.still get erorrs when loading up.route marker missing consit ect ect
I tested this (with OHLE patch 😉 ). There is an issue: signal WH448 never clears for me. I guess a Force green would do the trick?
Hi Frankoi1337, I had set a lot of signals with the AP Force red so if there was any problems then that would be a TS core issue, but did the scenario work for you otherwise 🙂
Well, I checked in the editor and WH448 itself has no APSEP marker.
No it didn’t work, as I only left at around 16:12 after a Ctrl+Tab finally gave me a proceed aspect. But then I got blocked around what I believe was Kentish Town, and clearly all AI were running late/stuck everywhere so I gave up 😀
Its rubbish when all you want is for it to work properly which I had no problems with it at all and tested it and ran all the way to Bedford. 🙁
i am getting a load of errors missing markers/blockages etc, went into world editor and there was errors for every single train.
Hi Darren, I am aware of many people having the same issue but myself for some odd reason. I have re-done the file which is v1.2 so if you can re-download it and try again. There is no reason for the scenario to fail as I tested it twice on my end. :/
i keep getting errors saying route blocked after it loads up.tried updating route as well.but no joy.thx
i get loads of errors as well.saying route is blocked.i try updating route see if that helps.thx
i’m also getting the same errors as well.
Hi! I don’t know if you have tested this scenarios, but I am getting a lot of errors on my end. Most of them are ‘Can’t find destination’, ‘No route’, ‘Broken Consist’, etc. If you are not getting this erros on your end, I’d reccommend repackaging the scenario.
Hello, I have tested this scenario on my end and had no issues as I would not have uploaded it. I can do this again through to see whether it is fixed for your pc.