InterCity 225 LNER/VTEC Pack9th May 2019
This pack contains all 31 VTEC Class 91s and DVTs complete with nameplates and special liveries. Interiors and passenger views have been changed to match VTEC colours as well. 60 different consists are included feature the full 9 coach set with a Class 91 at one end and DVT the other. The new LED light clusters are also included as well as new door sounds and destination labels.
This pack has been a collaboration with BHReskins, CHScenarios, Ash992478, James Ivell and Lewis Clowes.
InterCity Class 91 Loco Add-On
Class 91/Mk4 Enhancement Pack
Revised batch file to cater to those who are unable to extract the .ap file
PreLoad (QD Consist) names rectified
Numbering fixed on the OOU Mk4 carriages
We skipped V1.2 because the addition of LNER liveries is more than just a .1 kinda change
Clock fixed in the DVT – this was a DTG error originally
Complete rebuild of nameplates and some minor updates.
V1.7 – Released 18/12/21
Rework of Textures
Addition of New Liveries/Variants, LNER Flying Scotsman 91101 & 82205, LNER Flying Scotswoman 82205, LNER 91111 both Pre and Post 2021, VTEC Claus 91 128 + DVT 82209, Europhenix 91s
Added the ability to remove nameplates on base livery
Rework of .Bin files
added (Early) variant to the Mk4s which do not have the PRM door alarms
Other minor changes
V1.8 – Released 14/7/22
Addition of New LNER and updated 91110 BoBMF liveries
V1.8.1 – Released 07/9/22
Addition of new 91111 FTF livery
other minor fixes
V1.8.2 – Released 23/12/22
Addition of revised 91119 livery
Yet another attempt to fix the DVT brake gauge bug
This pack currently doesn’t not work correctly if installed using the ATS Installer
This pack has not been tested with the Major Wales Design LNER/VTEC Class 91 Pack and we cannot provide support to players that have both installed
Found an issue with the Brake pipe gauges on the Mk4 DVT where the needle stays at the bottom of the gauge and not move to the top
tried downloading this but no luck
window batch file in wrong location although downloaded into railworks
hmmm I was able to perform all the installation steps but when it came to using the batch file it says it can’t run on my PC. I’m running win 11 with a 3070Ti and an i7 so it’s not a tractor.
Am I the only one that doesn’t have the LNER Flying Scotswoman showing up on Quick Drive?
IVE GOT THE SAME ISSUE
ive uninstalled and tried again but i still have missing textures ! no scotswoman , loads of missing numbers and nameplates..no europhoniex dont get it
Hi the install worked fine and the set looks great in game. One irritating thing I’m experiencing is that the needle on the brake pipe is stuck in emergency even though the brakes are released and the set can move. any way to rectify this thanks?
Sorry forgot to mention that this is when driving with the DVT leading.
I’ve flagged that issue up as well
Hi , help please, ran the batch file in Railworks and says its not installed in correct location, done it manually and still incorrect , tried numerous times and still the same, try and load a scenario and i get no loco or rolling stock, any help please gang?
Hi, I’ve downloaded and installed V1.7 three times (replacing files left by V1.5 originally), and it works perfectly fine, however the extra liveries (flying scotswoman, europhoenix, etc.) that were added in .7 aren’t appearing on the QD consist list. Asides from this, none of the consists in the whole pack are coming up in the list in scenario editor. I’ve ticked the dtg pack, AP EP and JamesIvell 91 improvement and can’t see anything else relevant on the list. Have I missed something or is it a bit broken? Thanks in advance for any help.
I’ve tried installing this reskin, a couple of months ago I installed this pack and had no issues. However I tried installing this today and when installing it said its missing the batch file and I should check the location in the railworks file. I’ve tried re installing the pack and DLC on steam but still getting the issue, any ideas how to fix this?
can you please ensure you have followed the install instructions correctly, the batch file and Geomod4.exe should be in the railworks root folder
Hi. I downloaded Version 1.7 and extracted/ran the batch files as expected, however I now have a missing texture on Coach F as well as random Intercity logos appearing on the coaches. I also don’t see the new consists available. Any idea how I can fix this?
Was there not an EXE download supplied with this version? I’m pretty sure there was for other versions and this would have made the install a lot easier to do.
cause the person who made the .EXE installers has parted ways and to be honest, the EXEs were somewhat unreliable.
If you are suffering issues with the RSB not showing and have downloaded the Pack before 23/12/21 Please redownload the pack
Sorry to keep bothering you, but honestly this is really bugging me now, I have uninstalled the DLC 3 times now and reinstalled it all. The bat file went green at the very end and the rest of the train shows, it is just the buffet car that is missing and the headlights don’t work. Any help is appreciated.
it doesnt even show any vtec or lner and it isnt in the menu for me
Try going towards the end of the list for QD and there should be one with just IC225 and all the LNER/VTEC 91s are there. Hope that helps.
i read how to install it and i installed it in my railworks folder pressed allow geomod (yes option to make changes) and it turned green (success) so i opened train simulator and it didnt work i literally cant find it when i click on either class 91 or class 91 (IC225) which the AP is on. Can you help me?
Hi, great pack, but my buffet car isn’t showing on the list of carriages and in the full set. Any ideas?
im not entirely sure what you mean can you, do you mean not in the edtior stock list or is it not physically showing in game?
On the full consist it either gives me an East Coast grey liveried buffet car or none at all.
Are you sure you’ve installed it correctly, cause I cannot think of any other explanation for it, and so far no one else has reported a similar issue
I can confirm that the RSB is invisible and yes it has been installed correctly
yes, i have similar issue for this skins
Well I had no errors and it went green upon completing so unsure why this is not working.
It went green at the very end and I had 0 errors throughout I believe.
I’m having this issue as well. My install gave me zero errors but yet there’s no buffet car. Very confused. I’ve reinstalled the pack and addon many times
enjoying the pack so far, but I have a slight issue. for some reason, the wipers won’t show inside the cab. had no trouble installing it or anything, and I have all the requirements. any ideas on why/how to fix it?
is this in the 91 or DVT cab?
91 cab, DVT is fine
have had people experience this in the past, try redownloading the pack, if that doesnt work you may have to clean install the Class 91 East Coast DLC.
I’ll give reinstalling the DLC a go, cheers.
Only issue that needed flagging up is the nameplates not showing up on 91119 other than that no issues reported
redownload it should be fixed now
Can you fix the LNER one that were missing please? I was trying recopying but it’s showing the same issue. The VTEC ones are fine but I was trying to copy from there into LNER but not showing up.