DB Cargo Class 60 Biomass Freight Scenario For The DTG Liverpool to Manchester Route

DB Cargo Class 60 Biomass Freight Scenario For The DTG Liverpool to Manchester Route

8th October 2021 2 By BritishRail60062

A scenario for the Liverpool to Manchester Route and is set in 2018. Here you will drive 60100 from Liverpool to Huddersfield DRAX Power Station with a loaded bio fuel train. Please note that this version of the scenario uses the Imbue Studios Class 185 as AI and I have displaced the Class 185 from Jake Fuller to use the newer model. I have released this scenario separately to give the users an option to enjoy the newer Class 185 in the AI traffic. The rest of the scenario is unchanged. If you already have the original scenario that comes with my Class 60 DB Cargo Reskin Pack and you want to keep it. Please clone it and back it up BEFORE installing this one because the original scenario WILL BE OVERWRITTEN.

Tip: You will be moving a VERY heavy train and I recommend turning off the auto-sander and use the manual sander on this occasion because the train WILL stall if you do not do this and I also recommend not getting to Manchester too soon either because you will have trains ahead and you may get held at red lights. You will need patience to complete this one with success but if you like a challenge then this one is for you!

Here is what you will need to make this scenario useable.

Armstrong Powerhouse
Class 66 Enhancement Pack
Class 319 Pack 1
Class 313 Pack
Class 158 Cummins Enhancement Pack
Class 150/1 Enhancement Pack
BDA/BZA Steel Carriers
FSA Wagon Pack
TDA Tankers
HKA/JMA Bulk Hopper Wagon Pack

WCML South (London to Birmingham for the Class 390 and 221)
Class 150/1 DMU*
Class 159 DMU Pack
Class 66 EWS and Freightliner Locomotive Packs
European Loco & Assets Pack*.
*These are used as the base packs for the AP Enhancement Packs

Just Trains
Class 60 Advanced Pack
IWB Cargowaggons

Alan Thomson Sim
Imbue Studios/ATS Class 185 Pack

Train Sim Depot
DB Cargo Class 60 Reskin Pack

Scenario Type: Standard
Type: Freight
Difficulty: Hard
Duration: About 60 Minutes.

You are welcome to swap trains about in the scenario editor if you wanted to use better trains that you may own already or don’t have the required DLC but I am not responsible for any errors if you do this.

Please post any bugs or issues although I have tested this scenario many times and it works fine on my system although it may not work on yours. Use this scenario at your own risk.

Feedback and suggestions are most welcome and please enjoy the scenario.

Please check out my channel “Transport & Simulation Hub” on YouTube for Transport and Gaming videos and please support my creations by liking and sharing :).