Class 92 Caledonian Sleeper
24th December 2018The British Rail Class 92 is a dual-voltage electric locomotive which can run on 25 kV AC from overhead wires or 750 V DC from a third rail. It was designed specifically to operate services through the Channel Tunnel between Britain and France. Eurotunnel indicates the Class 92 locomotive as the reference for other locomotives which railway undertakings might want to get certified for usage in the Channel tunnel.
Locomotives of this type are operated by GB Railfreight/Europorte 2 and DB Cargo UK. In France, a number were also owned and operated by SNCF; these were classified as CC 92000 on French railways.
The Class 92 was intended as a mixed traffic locomotive for hauling both international freight trains and the ill-fated and never introduced Nightstar passenger sleeper trains through the Channel Tunnel. Since introduction the fleet was exclusively allocated to freight, however, in March 2015 six locomotives owned by GB Railfreight have begun passenger operations hauling the Caledonian Sleeper on behalf of Serco between London and Scotland, marking the very first use of the class in commercial passenger service.
This pack contains all 7 Class 92’s in the Caledonian Sleeper Livery with no tunnel plates and correct LED lights. Also includes 92038 with its original lighting and tunnel plates as well as grey 92044.
NOTE: If you had the original version, don’t worry! This overwrites it and adds some extra variants. Quick Drive Consist requirements can be found under ‘Optional Requirements’.
V2.4 released 29/12/23 – Added Non-AP versions for those who don’t have the AP Sound pack Note: all variants will have (L1) lights if using non-AP versions, fixed script issue
Requirements
Steam
Class 92 EWS
Armstrong Powerhouse
Class 92 Sound Pack
Optional Requirements for included Quick Drives Consists
Armstrong Powerhouse
Mk2D-F Coach Pack
AlanThomsonSim
Caledonian Sleeper MK3 SLEP Pack
I have the 92 SP i said Y and also it became red and said like have i got all requirements and system file cannot be specifed this happened on your mk3 caledonian sleeper thing aswell but I have all your requirements
im also getting error loading quick drive scenario
dont reply to these ive fixed it now
nevermind this one doesnt work but the mk3 one does
can i just use this without the ap soundpack since you cant get it anymore
it has a patch built into the batch file, but its a use at your own risk thing
ok and will you do this livery with the class 73 for the highlander
no
alright mate thats fine
In a quick drive for instance I can load up the Class 92 Railfreight, but every time I load up the Class 92 L1 or L2 variant its coming up with ‘An error occurred trying to load up the Quick Drive scenario’ even just selecting the light engine on its own
have you ensured you have installed it correctly
I have the EWS Class 92 Loco Add-On from DTG. I have downloaded this pack and ran the InstallCS92Pack.bat file as indicated in the manual. I do not have the AP 92 Sound Pack which I have confirmed in the batch file. On loading TS Classic I cannot load up the L1 or L2 variant of the Caledonian Sleeper.
in what way do you mean they dont load up, as in does it only show couplers in game or, does it show an error when you try to load it
Now the Mk5 CAF-built sleeper cars are with us, we need a Class 92 with drop down Dellner coupling at the front and a raised coupling at the rear to connect to the long train of sleeper cars.
Like in this prototype photo: https://www.railadvent.co.uk/wp-content/uploads/2019/07/MDE-92006-e1563120936133.jpg
I don’t take request, and I most definitely don’t take demands from anyone
hang fire there is something in the works at the moment to fix this
no one has reported it being broken other than those who do not have the requirements for which i’ve already released a patch for that
do you need the sound pack for this to function correctly?
yes
But the AP Class 92 sound pack is now gone. Is there a solution?
For Quick drive consists, if I just want the 92 in the cs livery do I still need all of the requirements or do I just need the DTG 92 and the AP 92?
I am able to get the CS 92 AP (L1) to appear on its own but not the (L2), I can not load the the consists with the 16 coaches at all.
have you got all the requirements and have you followed the install instructions correctly
can anyone help me when i download the class 92 and i have all the requrements the class 92 batch hasnt disaperd any ideads how i can fix that cheers
Well 4 time lucky .Not done anything different but after the install at last I can see the 92 and drive it with the coaches .Well that’s Train Simulator for you.
im having an issue where the new led variants of this pack are invisible ive sorted it before just cant remember how and its not your pack im just an idiot 🙂 any ideas how to fix this tried reinstalling the ap pack and redownloading this and still invisible
also got to mention that the bat file is all green and says everything is copied over okay, and its not the lights that invisible its the whole train except the screw link couplings if anyones had an issue like this and fixed it can you please let me know how to fix it? many thanks in advance if i dont manage to reply quick enough
one geo file i forgot about told you i was an idiot! great pack by the way
hi! mind telling me what the geo file was, can’t seem to find it
Class92_Grey.GeoPcDx the Batch file should take care of all the geo copying automatically
The cablight no longer works in both your Caledonian Sleeper and GBRf Class 92 reskins.
I did a bit of troubleshooting and it seems that the Cablights.bin file is missing from Class92\UKRD CS\CommonLights.
Copying the file from Class92\Default\CommonLights fixes the problem.
Very good reskin though , nice work 🙂
Having looked into it this issue is not present in the latest version please ensure you have the latest version of the pack when troubleshooting.
Very nice, exactly what I was looking for. Thank you!
For some reason i can’t use the keys on my keyboard to drive the locos in this pack. i can drive everything else apart from the CS 92’s and I’ve reinstalled the AP SP and still no result, Do you have any suggestions on how i could fix this issue?
I have never experienced this issue before with the pack and no one else has reported an issue so the only thing i can really suggest is to reinstall the 92 + AP pack and start again
can You Please help me when i download the class 92 and i have all the requrements the class 92 batch hasnt disaperd any ideads how i can fix that
cause the bat isn’t meant to disappear
When I try to copy the assets folder into the railworks folder it says destination folder access is denied and doesnt allow me to copy 7za
Never mind, tried it again later and it just worked for some reason