![[390] 1R00 05:00 Wolverhampton – London Euston](https://alanthomsonsim.com/wp-content/uploads/edd/2022/04/jpg/bradleigh10/20220416222631_1-1140x641.jpg "[390] 1R00 05:00 Wolverhampton – London Euston")
[390] 1R00 05:00 Wolverhampton – London Euston
18th April 2022On a foggy summers morning, take pride in your job and head Avanti West Coast’s 390119 ‘Progress’ down from Birmingham New Street to London Euston. No issues on the journey south and should have no excuss for a late arrival.
All AI is taken from the current WTT timetable. All passenger and ECS services have been added, with a couple of freight. DC lines feature London Overground only.
**Known Issues**
Broken consist error at start of scenario, please press F2 on the error message and should be able to play the scenario with no issues.
Red light at Watford Junction and unable to pass, this only seems to be limited to a few and AFAIK is a bug with the UK signals used on the route.
Duration: 90 minutes.
Requirements:
DTG WCML South*
Major Wales Class 390 revamp pack (Also requires AP Class 390 Sound pack)*
DTG Portsmouth – London & AP Class 350 Enhancement pack*
DTG Cross City*
DTG Class 86 & AP Class 86 Enhancement pack
Thompson WCML Trent Valley
Thompson Class 170 & AP Class 170 Enhancement pack & WMT Class 170 reskin (Off ATS)*
Just Trains 2019 Voyager (& Semaphore Signals voyager/meridian pack)
AP Sky and Weather pack*
All the above requirements will allow the full game play, however only those marked with (*) are essential.
To install, simply drag the ‘Content’ folder into your ‘Railworks’ folder (Usually found in Program Files/Steam/Steamapps/Common).
Hoope you enjoy and feel free to comment with any issues or questions.
I got as far as North Wembley, got held at a red, there was a freightliner in front at the next signal and a Euston-Watford ECS service going backwards and forwards on the up slow to down slow crossing ahead, probably meant to clear to let the freightliner cross to the slow line but it just kept going back & forth and that was it, couldn’t proceed, was ok up until then, no red at Watford or anything.
Hi mate, really sorry for the issues everyone seems to be different. I’ve had many say its worked throughout whilst others saying consist broke or red signal at Watford. This is a new one on me, though I’ve experienced in a couple of scenarios I’ve downloaded where AI do some random things. Apparently the signals used on the route has a bug (What I was told anyways) which can cause this type of thing. One option I can suggest is using TSTools, remove the London – Watford (ECS) from the scenario as that could be causing the issues.
Thank you, an excellent scenario. I had the broken consist message at the start and I used the F2 option, and all worked well.
Thank you, glad you enjoyed. Thanks for letting me know it still works after pressing F2, honestly don’t know whats causing it as all consists are fine when I checked.
After it loads up.i get broken consit modified. Cheers
Hmm strange, thanks for letting me know I’ll have a gander tomorrow. Does it say which consist it is? And does it still let you play the scenario if you press back space on the message?
hi mate.thx for getting back to me.msg just says broken consit modifired.thx again
Hi mate, after testing again on my PC the orignal scenario works fine, but when installed via the .rwp and play it comes up the error. I have edited the upload link so if you could please re-download the scenario.. Don’t forget to first delete the orignal one first by going inot build on the TS menu, Scenarios, WCML South and fine the 1R00 run and press delete, before re installing. Please let me know if this works. Thanks!
Stuck on a red and unable to tab at Watford Junction. Shame as it was a decent run until then. Don’t know what the issue is.
Ahh ok that is strange, both my test runs worked fine throughout. Does the map show you have the route or are points set against you? I’ll have a look at it tomorrow to see if an AI has gone rogue. Thanks for letting me know.
Brill, cheers mate. Point set against me I think as I tried just SPADing then derailed shortly after.
After having a quick look, I think the .rwp file may be to blame… I have re uploaded a new link which will see you simply drop the content folder into your railworks one. (Delete the orignal scenario first) and hopefully that helps! If not then I’m at a bit of a dead end because no AI is set against you and nothing ahead so should be a green signal at Watford.
I downloaded the scenario yesterday and encountered the same problem at Watford Junction. Points set against me with a 350 standing at a red on the up slow.
I’ve since come to learn that it’s actually TS that’s playing up rather than the scenario. Something to do with the signalling pack on routes being bugged. Also did you save and resume the scenario at any point? I’ve noticed when doing that on some other scenarios it tends to mess it all up giving random routes and holding AI and player trains at red signals.
I had the same issue. I reloaded and the signal cleared, cheers