Cambridge to Peterborough route

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #1384916
    Howard Bell

    I made a scenario, 6L37 09:54 Hoo Junction Up Yard to Whitemoor Local Distribution Centre.with a AP Class66 GBRF (L2) and 25 empty JNA-C NRs
    to give the route it’s 1st look-over.Starting just short of Cambridge.the overall run was of 31mls.
    so a decent enough run to give my impressions.
    Well, Bravo team ATS.a well done rendition,foliage is placed so that you don’t get a repetitvie use of tree’s, bushes etc.track-side also fits in combined gives the feeling of depth the use of lighting blending well to add to the perspective.
    there are one or two points, that do need to be looked at. having to tab the signaling! on leaving Cambridge line one I had started there to set up the 66,crossing over to then pass through PTL per the real routeing. I think, there is a signal 0147 that would clear your path on the crossing? I did have a single caution at 4s west end but then had to tab the east sig. again at Canbride holding 4 north.these are minor but needs a could be a game bug!
    frame rates 96% was had a steady excellent 78fps.then in area’s a drop to 12/14. which was odd because the area’s most times held no large asset blocks. tile crossings seemed to drop to 24/24 not a problem it was almost unnoticeable.
    the price to subcribers a cracking £9.99 worth every penny.
    my comp specs
    Chillblast Fusion Krypton – Skylake Gaming PC 1
    Zalman M1 Mini ITX Tower – Black 1
    Intel Core i5 6600K Skylake Processor 3.50 GHz (Overclocked to up to 4.4GHz) 1
    Chillblast Centurion Direct Contact CPU Cooler 1
    Generic thermal paste 1
    Asus Z170I PRO GAMING Mini-ITX Motherboard – Skylake CPU only 1
    16GB Corsair/Crucial DDR4 2133MHz Memory (2 x 8GB sticks) – Skylake CPU only 1
    Chillblast NVIDIA GeForce GTX 970 4GB Graphics Card 1
    128GB Samsung SM951 M.2 PCIe Solid State Drive 1
    Seagate 2000GB 7200RPM Hard Disk – 6Gbps 1
    not bad but getting on and needs a up-grade.
    I hope you find this usefull.


    I have a question. If this is the wrong place to ask then I apologise and please feel free to move this to the correct place.

    I am looking to buy this route as it is one I know well IRL. I’m wondering if the ‘scenario requirements’ listed means I need ALL of those for me to use the route or just to complete all of the scenarios.

    For example, I already have the Class 170 from Steam. If I buy this route, will I be able to do all of the Class 170 scenarios problem free or will I need ALL of the locomotives listed in order to do ANY of the scenarios included in this pack?

    Thanks for any help.

    Stuart Palmer

    You can always use TS Tools to substitute missing assets in scenarios.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.