
InterCity 225 LNER/VTEC Pack
9th May 2019This pack contains all 31 VTEC Class 91s and DVTs complete with nameplates and special liveries. Interiors and passenger views have been changed to match VTEC colours as well. 60 different consists are included feature the full 9 coach set with a Class 91 at one end and DVT the other. The new LED light clusters are also included as well as new door sounds and destination labels.
This pack has been a collaboration with BHReskins, CHScenarios, Ash992478, James Ivell and Lewis Clowes.
Requirements
Steam
InterCity Class 91 Loco Add-On
Armstrong Powerhouse
Class 91/Mk4 Enhancement Pack
Changelog:
V1.1
Revised batch file to cater to those who are unable to extract the .ap file
PreLoad (QD Consist) names rectified
Numbering fixed on the OOU Mk4 carriages
V1.3
We skipped V1.2 because the addition of LNER liveries is more than just a .1 kinda change
Clock fixed in the DVT – this was a DTG error originally
V1.5
Complete rebuild of nameplates and some minor updates.
V1.7 – Released 18/12/21
Rework of Textures
Addition of New Liveries/Variants, LNER Flying Scotsman 91101 & 82205, LNER Flying Scotswoman 82205, LNER 91111 both Pre and Post 2021, VTEC Claus 91 128 + DVT 82209, Europhenix 91s
Added the ability to remove nameplates on base livery
Rework of .Bin files
added (Early) variant to the Mk4s which do not have the PRM door alarms
Other minor changes
V1.8 – Released 14/7/22
Addition of New LNER and updated 91110 BoBMF liveries
V1.8.1 – Released 07/9/22
Addition of new 91111 FTF livery
other minor fixes
V1.8.2 – Released 23/12/22
Addition of revised 91119 livery
Yet another attempt to fix the DVT brake gauge bug
V1.8.3 Released 08/4/23
Fix to missing BMAC lights
INSTALLATION NOTES
This pack currently doesn’t not work correctly if installed using the ATS Installer
This pack has not been tested with the Major Wales Design LNER/VTEC Class 91 Pack and we cannot provide support to players that have both installed
lads and ladies, install as the manual pdf says.
it does work and it looks fantastic. as always, thank you!
There is a problem with the installation of this pack. All the comments above are correct, and YES the ap file of the class 91 DTG Pack 2 unzipped, still not working.
To anyone who sees the comments below:
The pack does work. You just have to extract the .ap file inside DTG/Class91Pack02
All of the above done, still not installing.
copy the assets from the file into railworks then locate to the railworks asset folder then search for the installer
actually you can just copy the batch file to your railworks folder it still works
I see alot of people have been having alot of trouble getting this installed. Me to. Just get a red screen saying batch location incorrect. I also notice the total lack of help or guidance. . Pity was looking forward to using this pack. Hope this isn’t a sign of things to come.
“hope this isn’t sign of things to come” what on earth is that supposed to mean, and i thought “Batch Location is Incorrect, Please check that this batch file has been placed in the Railworks folder” is rather self explanatory, have you have copied the Assets folder, manual folder, geomod4.exe and Install VTEC_LNER Class 91.bat from the zip file into the Railworks Root folder as per the install instructions cause it shouldn’t give an error if you put it in the correct location.
How do I install this pack, all I get is a red screen saying that the batch is in an incorrect location, even though I have done all of the installation instructions.
i thought “Batch Location is Incorrect, Please check that this batch file has been placed in the Railworks folder” is rather self explanatory, have you have copied the Assets folder, manual folder, geomod4.exe and Install VTEC_LNER Class 91.bat from the zip file into the Railworks Root folder as per the install instructions cause it should work if done correctly.
is there a way to download older versions(1.5)?
I have had to re-instal due to a hard drive change and did everything but when I run the batch file this shows up in red:
The system cannot find the path specified.
A:\SteamLibrary\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\VTEC(EC)\Engine2”
The system cannot find the path specified.
A:\SteamLibrary\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\LNER\Engine”
The system cannot find the path specified.
A:\SteamLibrary\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\LNER 2\Engine”
The system cannot find the path specified.
A:\SteamLibrary\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\LNER WS\Engine”
The system cannot find the path specified.
A:\SteamLibrary\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\LNER FS\Engine”
The system cannot find the path specified.
A:\SteamLibrary\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\LNER FS(W)\Engine”
The system cannot find the path specified.
A:\SteamLibrary\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\LNER UB\Engine”
The system cannot find the path specified.
GeoPcDx files not found. Please check you have all the requirements installed
Press any key to continue . . .
im struggling to download this pack ive been dragging it into my railworks folder but it say’s it cant find the geos
Loving this pack, one issue though, on the DVT I cannot turn the headlights off when I’ve terminated. (This is all the LED versions, not tried BMAC yet)
How would I update this? Do I simply just redownload/reinstall again?
I previously had version 1.5 installed from years ago and ran a sucessfully ran a scenario as recently 24.12.22.
Noticed that the pack had updated 1.8 so decided to update and now does not work at all.
I keep getting an errors along the lines off
C:\Program Files (x86)\Steam\steamapps\common\RailWorks>copy “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\Default\Engine\mk4_DVT.GeoPcDx” “Assets\DTG\Class91Pack02\RailVehicles\Electric\MK4 DVT\VTEC(EC)\Engine2”
The system cannot find the path specified.
Have tried pasting the GEOPCDX files manually but still cannot get the pack to install.
If anyone can please offer me any advice or support I would be internally grateful (and would happily buy several very large beers for whoever can help resolve this!)
I keep having to reinstall 1.5 so I don’t get texture issues or brake gauge problems. Please can you fix these
Im getting the same issue for some reason.
please can you share the link for the 1.5 download
well no its an out of date version and unsupported, and if you have all the requirements and have them installed along with correctly following the install instructions the pack should work fine from what i can see here 5 people out of all the people who have installed 1.8.3 have had issues and of which all the errors that have been provided only show if you either don’t have the requirements installed(or have messed around with their install so it can’t find the .AP files) or are errors which only show if you haven’t followed the install instructions correctly. I suppose its my fault that i try to give people the benefit of the doubt that they having an at least vague understanding of train sims file structure
How do i install this??
download it, and then there should be either 1. a manual, or 2. a readme