Class 92 Caledonian Sleeper

Class 92 Caledonian Sleeper

24th December 2018 3 By JamesIvell

Share this

The British Rail Class 92 is a dual-voltage electric locomotive which can run on 25 kV AC from overhead wires or 750 V DC from a third rail. It was designed specifically to operate services through the Channel Tunnel between Britain and France. Eurotunnel indicates the Class 92 locomotive as the reference for other locomotives which railway undertakings might want to get certified for usage in the Channel tunnel.
Locomotives of this type are operated by GB Railfreight/Europorte 2 and DB Cargo UK. In France, a number were also owned and operated by SNCF; these were classified as CC 92000 on French railways.

The Class 92 was intended as a mixed traffic locomotive for hauling both international freight trains and the ill-fated and never introduced Nightstar passenger sleeper trains through the Channel Tunnel. Since introduction the fleet was exclusively allocated to freight, however, in March 2015 six locomotives owned by GB Railfreight have begun passenger operations hauling the Caledonian Sleeper on behalf of Serco between London and Scotland, marking the very first use of the class in commercial passenger service.

This pack contains all 7 Class 92’s in the Caledonian Sleeper Livery with no tunnel plates and correct LED lights. Also includes 92038 with its original lighting and tunnel plates as well as grey 92044.

NOTE: If you had the original version, don’t worry! This overwrites it and adds some extra variants. Quick Drive Consist requirements can be found under ‘Optional Requirements’.

 

Requirements

Steam
Class 92 EWS

Armstrong Powerhouse
Class 92 Sound Pack

 

Optional Requirements for included Quick Drives Consists

Armstrong Powerhouse
Mk2D-F Coach Pack

AlanThomsonSim
Caledonian Sleeper MK3 SLEP Pack

Free – Add to Basket

About the author

I Mainly Create real and fictional reskins for trains from the British railway network

3 Comments

  • Callum McCreadieDownloaded says:
    4th July 2020 at 17:34

    For some reason i can’t use the keys on my keyboard to drive the locos in this pack. i can drive everything else apart from the CS 92’s and I’ve reinstalled the AP SP and still no result, Do you have any suggestions on how i could fix this issue?

  • Nelson CarterDownloaded says:
    3rd June 2020 at 17:07

    When I try to copy the assets folder into the railworks folder it says destination folder access is denied and doesnt allow me to copy 7za

Leave a Reply